Filter
Top Products
Recording with
ttie
Timer
I
When the
clock
IS
set
Etartl
to 24H mode, “AM/
r
PM,5
WIII
fl0t
aolsear
WOPI
[Tape Speed]
A
1
i
ATE
PR
START STOP
5,12
47
12:00PH12:30PH~
-,--
--
-:-_
.:--
INoTE>
-,--
--
_:-_
.:~-
-,--
--
~:-_
.:.-
l
SP: Standard Play
l
LP: Long Play
l
EP,
Extended Play
(only NTSC Tape)
SET
[Timer review]
MENU
0
I)
Normal
Screen
TIMER
ON/OFF
0’
@ Set the start time with the numeric buttons or
A/v
and
press
F.
@
Set the stop time with the numeric buttons or
A/Y
and
press
b.
@
Select the tape speed with
A
or
V.
(See Intelligent
Timer Recording (JUST REC)
on page 32.)
@ Press SET. To programme additional timer settings,
repeat steps @ through
0.
@ To return to the normal screen, press MENU.
(D To set the VCR for automatic timer recording, press
TIMER ON/OFF and ensure the
“a”
indicator lights on
the VCR display.
l If the video cassette runs out before recording all the programmes, your VCR will stop, eject the cassette, and shut off
automatically.
l If power is interrupted for more than 60 minutes (power failure, etc.), all timer settings will be cancelled.
l If TIMER ON/OFF is pressed when there is no cassette loaded,
“I9
flashes for 5 seconds, indicating that timer recording is
not possible.
l If TIMER ON/OFF is pressed while a cassette with an uncovered erasure protection hole is loaded,
“0”
flashes and the
cassette is ejected.
l When
“B”
is
lit,
regular VCR operation, clock setting and settrngicancelllngiconfirming timer positions are not possible. For
regular VCR operation, clock setting and setting/cancelling/confirming timer positions, press TIMER ON/OFF to disengage
the timer
(“B”
disappears), and then turn on your VCR.
l During timer recording, the timer cannot be set.
l To terminate timer recording, press STOP during timer recording.
l If the same time is input for the start time and the stop time, the timer setting will be cancelled.
30