Filter
Top Products
8
INSTALLING BATTERIES
1. On the back of the remote control, push the
tab and lift off the battery cover.
2. Locate the two (2) enclosed AA batteries.
Match the + and - marks with those in the
battery case, then insert them.
3. Align the covers keys with the cases holes and
press the cover back into place. The tab should
click when the cover is locked.
NOTE: When batteries need replacement, the remote
control will cease to operate. Replace the
batteries and the unit will be restored to its
full functionality, complete with your favorite
settings.
PROGRAMMING DEVICE CONTROL
The Atlas Shaw DVR/PVR 5-Device Universal Remote
Control is preprogrammed to operate the cable box
(converter) provided by your cable system, an RCA TV, a
Toshiba DVD player, an RCA VCR (as an AUX device),
and a Pioneer audio receiver. To control devices other
than the default brands, perform the following steps;
otherwise skip this section.
4. Test the remote control by pressing any mode
key (e.g., TV). If the batteries are inserted
correctly, the LED (red light) will blink once.
❶
❸
❷