Filter
Top Products
5
Figure 3: IR Emitter Figure 4: IR Receiver
Application
Installation
1. Connect your HDMI source to the Wireless transmitter (TX).
2. Connect the IR emitter cable to the Wireless transmitter and point the
emitter directly to the IR of the HDMI source.
Please ensure that you place the IR emitter in close proximity to the display device
and the IR Sensor in an area accessible to the remote control’s infrared signal.
3. Plug the USB power adapter into the Wireless transmitter’s USB port,
then plug the power adapter into a reliable power source.
4. Connect your HDMI display to the Wireless receiver (RX).
5. Connect the IR receiver cable to the Wireless receiver, and point the IR
receiver directly to the IR of the HDMI display.
6. Plug the USB power adapter into the Wireless receiver’s USB port, then
plug the power adapter into a reliable power source.