51 English
Appendices
Appendices
Replacing the lamp
Whenthelamplifeisnearingtheendofuse,youwillreceivea
warning message.
Whenyouseethismessage,pleasecontactyourlocalreseller
or service center to change the lamp as soon as possible.
Make sure the projector has been cooled down for at least 30
minutes before changing the lamp.
Warning: Lamp compartment may be hot! Allow it to cool down
before changing the lamp.
Warning:Toreducetheriskofpersonalinjury,don’tdropthe
lamp module or touch the lamp bulb. The bulb may shatter and
cause injury if it is dropped.
Caution: Hot! Let unit cool for 30 minutes before removing
lamp module cover. Do not obstruct lens. High pressure lamp
may shatter if improperly handled. Disconnect power before
changing lamp. Replace only with SMART Technologies
approved lamp module.
Lamps contain mercury and must be recycled or disposed
ofaccordingtolocal,stateorfederallaws.
Warning: Be careful of broken glass when replacing the lamp.
Wear eye protection and gloves when replacing lamp.