Filter
Top Products
18
GB
Basic Operations
Depending on the DVD VIDEO or VIDEO CD,
some operations may be different or restricted.
Refer to the operating instructions supplied with
your disc.
1 Turn on your TV.
2 Switch the input selector on the TV to
this system.
3 Press "/1.
The system turns on.
Unless the system is set to “DVD,” press
FUNCTION to select “DVD.”
4 Press A.
5 Load a disc.
Place one disc on the tray, and then press A.
Note
•When you play an 8 cm disc, place it on the
inner circle of the tray. Be careful that the disc is
not skewed on the inner circle of the tray.
•Do not forcibly press the disc tray closed with
your finger, as this may cause malfunction.
•Do not place more than one disc on the tray.
6 Press H.
The system starts playback (continuous
play).
Adjust the volume on the unit.
The volume level appears on the TV screen
and in the front panel display.
Note
•Depending on the system status, the volume level
may not appear on the TV screen.
To save the power in standby
mode
Press "/1 while the system turns on. To cancel
standby mode, press "/1 once.
Additional operations
Basic Operations
Playing Discs
"/1
Disc tray
FUNCTION
Adjust the
volume
H
A
"/1
FUNCTION
x
H
X
./>
MUTING
VOLUME +/–
/
Z
To Press
Stop x
Pause X
Resume play after pause X or H
Go to the next chapter,
track, or scene
> (except for JPEG)
Go back to the preceding
chapter, track, or scene
. (except for JPEG)
Turn off the sound
temporarily
MUTING. To cancel,
press it again or
VOLUME + to adjust
the sound volume.