Sony 3-298-969-11(1) Flat Panel Television User Manual


 
29
GB
Using Menu Functions
Set-up
Auto Start-up You can run the initial set-up that appeared when you first connected the TV
(page 6), and select the language, country/area and tune in all available channels
again.
Even if you have made the settings when you first connected the TV, you may need
to change the settings after moving house, or to search for newly launched
channels.
Language Sets the language displayed on the menu screens.
Screen Settings Screen Format See “To change the screen format manually” on page 17.
Auto Format Automatically changes the screen format to match the
broadcast signal. If you want to use the setting that you
specified in “Screen Format”, select “Off”.
Display Area Adjusts the picture display area in 1080i/p and 720p sources
when “Screen Format” is set to “Wide”.
Auto During digital broadcasts, displays
pictures in accordance with the settings
recommended by the broadcast station.
Full Pixel Displays the original picture area.
Normal Displays pictures in their recommended
size.
Horizontal Shift Adjusts the horizontal position of the picture.
Vertical Shift Adjusts the vertical position of the picture when “Screen
Format” is set to “Smart”, “Zoom” or “14:9”.
~
“Vertical Shift” is not available when “Display Area” is set
to “Full Pixel”.
Vertical Size Adjusts the vertical size of the picture when “Screen Format”
is set to “Smart”, “Zoom” or “14:9”.
PC Settings Screen Format Sets a screen format for displaying pictures from your PC.
Full 1 Enlarges the picture to fill the vertical
display area, while maintaining its
original proportion.
Full 2 Enlarges the picture to fill the display
area.
Reset Resets all PC screen settings to factory settings.
Auto Adjustment Automatically adjusts the display position and phase of the
picture when the TV receives an input signal from the
connected PC.
z
“Auto Adjustment” may not work well with certain input
signals. In such cases, manually adjust “Phase” and
“Horizontal Shift”.
Phase Adjusts the phase when the screen flickers.
Pitch Adjusts the pitch when the picture has unwanted vertical
stripes.
Horizontal Shift Adjusts the horizontal position of the picture.
Power
Management
Switches the TV to standby mode if no signal is received for
30 seconds.
(Continued)