Filter
Top Products
22
GB
4 HDMI IN 1 or 2 HDMI 1 or
HDMI 2
Digital video and audio signals are input from the connected
equipment.
In addition, when you connect the equipment that is
compatible with control for HDMI, communication with the
connected equipment is supported. Refer to page 30 to set up
this communication.
If the equipment has a DVI socket, connect the DVI socket to
the HDMI IN 2 socket through a DVI - HDMI adaptor
interface (not supplied), and connect the equipment’s audio
out sockets to the audio in sockets in the HDMI IN 2 sockets.
~
• The HDMI sockets support the following video inputs only:
480i, 480p, 576i, 576p, 720p, 1080i, 1080p and 1080/24p.
For PC video inputs, see page 36.
• Be sure to use an HDMI cable that bears the HDMI logo.
• When connecting an audio system that is compatible with
control for HDMI, be sure to also connect it to the
DIGITAL AUDIO OUT (OPTICAL) socket.
9 HDMI IN 3 HDMI 3
5 /PC IN PC It is recommended to use a PC cable with ferrites like the
“Connector, D-sub 15” (ref. 1-793-504-11, available in Sony
Service Centre), or equivalent.
6 DIGITAL
AUDIO OUT
(OPTICAL)
(except for KDL-
40S40xx/40U40xx)
Use an optical audio cable.
7 You can listen to TV sound on the connected Hi-Fi audio
equipment.
8 CAM
(Conditional
Access Module)
Provides access to pay TV services. For details, refer to the
instruction manual supplied with your CAM.
To use the CAM, remove the “dummy” card from the CAM
slot, then turn off the TV and insert your CAM card into the
slot. When you are not using the CAM, we recommend that
you keep the “dummy” card in the CAM slot.
~
• CAM is not supported in some countries/areas. Check with
your authorised dealer.
0 AV3, and
AV3
AV3 When connecting mono equipment, connect to the AV3 L
socket.
qa i Headphones You can listen to TV sound through headphones.
Connect to Input symbol on
screen
Description