Sony 3-452-775-11(1) Blu-ray Player User Manual


 
19
Hookups and Settings
Step 2: Connecting to Your AV Amplifier (Receiver)
About audio/HDMI OUT jacks
The player has the following audio jacks. Connect the player to your AV amplifier (receiver)
according to the input jack on your AV amplifier (receiver).
z
For correct speaker location, refer to the operating
instructions supplied with the connected
components.
b
When you connect the player to your AV
amplifier (receiver) using an HDMI cable, do one
of the following:
– Connect your AV amplifier (receiver) to your
TV using an HDMI cable, or
– Connect the player to your TV using a video
cable other than an HDMI cable (component
video cable, S-video cable, or audio/video
cable).
If you connect a component that does not conform
to the selected audio signal, a loud noise (or no
sound) will come from the speakers, which could
damage your ears or the speakers.
Jack type Hookup
Digital See “Connecting to an HDMI jack” (page 20).
See “Connecting to digital jacks (OPTICAL/
COAXIAL)” (page 21).
Analogue See “Connecting to audio L/R jacks” (page 22).
,continued