Filter
Top Products
Watching TV
15
GB
Watching TV
Watching TV
1 Press 1 on the TV to switch on the TV.
When the TV is in standby mode (the 1
(standby) indicator on the TV (front) is
red), press "/1 on the remote to switch on
the TV.
2 Press DIGITAL to switch to digital mode
or ANALOG to switch to analogue mode.
The channels available vary depending on
the mode.
3 Press the number buttons or PROG +/– to
select a TV channel.
To select channel numbers 10 and above
using the number buttons, enter the
second and third digits within two
seconds.
To select a digital channel using the
Guide, see page 17 or 20.
In digital mode
An information banner appears briefly.
The following icons may be indicated on
the banner.
Additional operations
To access Digital Text
Many broadcasters provide a Digital Text
service. Digital Text offers graphically rich
contents, compared to Analogue Text.
Select a digital channel which provides Digital
Text, then press /.
3
2
3
2
1
: Interactive service is available (MHEG
Digital Text)
: Interactive service (MHEG Digital Text)
is currently disabled
: Radio service
: Scrambled/Subscription service
: Multiple audio languages available
: Subtitles available
: Subtitles available for the hearing
impaired
: Recommended minimum age for current
programme (from 4 to 18 years)
: Parental Lock
To Do this
Turn on the TV from
standby mode
without sound
Press %. Press 2 +/– to
set the volume level.
Adjust the volume Press 2 + (increase)/
– (decrease).
(Continued)