Filter
Top Products
40
GB
AV Set-up AV Preset Assigns a name to any equipment connected to the side and
rear sockets. The name will be displayed briefly on the screen
when the equipment is selected. You can skip an input source
that is not connected to any equipment.
1 Press F/f to select the desired input source, then press
.
2 Press F/f to select the desired option below, then press
.
-, CABLE, SAT,
VCR, DVD/BD,
GAME, AUDIO
SYSTEM, CAM,
PC
Uses one of the preset labels to assign a
name to connected equipment.
Edit Creates your own label.
1 Press F/f to select the desired letter
or number (“_” for a blank space),
then press g.
If you input a wrong character
Press G/g to select the wrong
character. Then, press F/f to select
the correct character.
2 Repeat the procedure in step 1 until
the name is completed.
3 Select “OK”, then press .
Skip Skips an input source that is not
connected to any equipment when you
press F/f to select the input source.
AV2 Input Sets a signal to be input through the socket labelled /
/ AV2 on the rear of the TV.
Auto Switches automatically among the signals
of RGB input, S Video input, Composite
video input depending on the input
signal.
RGB Inputs the RGB signal.
S Video Inputs the S Video signal.
Composite Inputs the Composite video signal.
AV2 Output Sets a signal to be output through the socket labelled /
/ AV2 on the rear of the TV. If you connect a
VCR/ DVD recorder or other recording equipment to the
/ / AV2 socket, you can then record from the
equipment connected to other sockets of the TV.
TV Outputs a broadcast.
Auto Outputs whatever is being viewed on the
screen (except signals from the HDMI IN
1, HDMI IN 2, HDMI IN 3, /
COMPONENT IN and / PC IN
sockets).