Filter
Top Products
46
Specifications
* While the TV is collecting TV Guide data and/or during software update the power consumption is less than 30 W.
~
• Optional accessories availability depends on its stock.
• Design and specifications are subject to change without notice.
Model
KDL-32VL140
System
Television system
NTSC: American TV standard
ATSC (8VSB terrestrial): ATSC compliant 8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Channel coverage
Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69
Analog Cable: 1 - 135 / Digital Cable: 1 - 135
Panel system
LCD (Liquid Crystal Display) Panel
Speaker output
10 W + 10 W
Input/Output jacks
CABLE/ANTENNA
75-ohm external terminal for RF inputs
VIDEO IN 1/2/3
S VIDEO (4-pin mini DIN) (VIDEO 1 only): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative /
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
COMPONENT IN 1/2
YPBPR (Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / PB: 0.7 Vp-p, 75 ohms /
P
R: 0.7 Vp-p, 75 ohms / Signal format: 480i, 480p, 720p, 1080i, 1080p
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
HDMI IN 1/2/3/4
HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p / Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20
and 24bits, Dolby Digital
AUDIO (HDMI IN 4 only): 500 mVrms (Typical) / Impedance: 47 kilohms
AUDIO OUT
500 mVrms (typical)
DIGITAL AUDIO OUT
(OPTICAL)
PCM/Dolby Digital optical signal
PC IN
D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive
See the PC Input Signal Reference Chart on page 14.
PC AUDIO INPUT
Stereo mini jack, 500 mVrms, (Typical) / Impedance: 47 kilohms
Power and others
Power requirement
120 V AC, 60 Hz
Power consumption
in use
160 W
in standby
All models less than 0.1 W*
Screen size
(inches measured diagonally)
31.5
(32 class)
Display resolution
1,920 dots (horizontal) × 1,080 lines (vertical)
Speaker/Full range (2) (mm)
(inches)
42 × 150
1
3
/4 × 5
7
/8
Dimensions with stand (mm)
(inches)
809 × 584 × 242
31
7
/8
× 23
× 9
5
/8
without stand (mm)
(inches)
809 × 542 × 99
31
7
/8
× 21
3
/8
× 4
wall-mount hole pattern (mm)
200 × 200
wall-mount screw size
M6 (length: refer to diagram on page 7)
Mass with stand (kg)
(lb.)
15.0
34.0
without stand (kg)
(
lb.)
12.5
28.0
Supplied accessories
Remote control RM-YD023 (1) / Size AA batteries (2) / Cable holder (1 attached to the Table-Top Stand) /
Operating Instructions (1) / Quick Setup Guide (1) / Warranty Card (1) / Safety and Regulatory Booklet (1) /
Attaching the Table-Top Stand (1)
Optional accessories
Connecting cables / Support Belt Kit / Wall-Mount Bracket and TV Stand: see page 2