Filter
Top Products
Getting Started
9
GB
3 Fasten the support belt to the stand
with a wood screw.
You can fasten a wood screw to the
centrally-positioned hole on the rear of the
stand.
For details on acquiring the support belt and
screws, refer to the operating instructions
supplied with Sony LCD TV.
Arranging the cables
You can arrange the cables from the TV and
other components in the top cover and side cover
of the stand.
1 Connect the cables from the TV first
(page 10), and then connect the cables
from the other components (pages 12,
13).
2 Replace the top cover while gathering
the cables together, and then replace
the side cover.
Guide the TV cables through the square
notch on the top cover and insert the four
projecting parts on the top cover and side
cover into the holes on the rear side of the
stand as shown in the illustration.
• Be careful not to pinch the cables when you replace
the top cover and side cover.
Hole for a wood screw
Note
Side cover
Top cover