Sony 4-178-243-1 Blu-ray Player User Manual


 
Additional Information
73
US
Dimensions (approx.) 290 mm × 49 mm × 49 mm
(11
1
/2 in × 1
15
/16 in ×
1
15
/16 in) (w/h/d)
Mass (approx.) 0.28 kg (10 oz)
Subwoofer (SS-WSB101) for BDV-E870/
BDV-E370/BDV-T37
Speaker system Subwoofer Bass reflex
Speaker unit 160 mm (6
3
/8 in) cone type
Rated impedance 3 ohms
Dimensions (approx.) 260 mm × 320 mm × 260
mm (10
1
/4 in × 12
5
/8 in ×
10
1
/4 in) (w/h/d)
Mass (approx.) 5.2 kg (11 lb 8 oz)
Subwoofer (SS-WSB102) for BDV-E570/
BDV-E470/BDV-T57
Speaker system Subwoofer Bass reflex
Speaker unit 180 mm (7
1
/8 in) cone type
Rated impedance 3 ohms
Dimensions (approx.) 275 mm × 405 mm × 275
mm (10
7
/8 in × 16 in ×
10
7
/8 in) (w/h/d)
Mass (approx.) 7.5 kg (16 lb 12 oz)
General
Power requirements
North American and Mexican models:
120 V AC, 60 Hz
Latin American models: 110 V - 240 V AC,
50/60 Hz
Power consumption On: 170 W
Standby: 0.3 W (at the
Power Saving mode)
Dimensions (approx.) 430 mm × 85 mm × 335
mm (17 in × 3
3
/8 in ×
13
1
/4 in) (w/h/d) incl.
projecting parts
Mass (approx.) 4.8 kg (10 lb 10 oz)
USB Wireless LAN Adapter (UWA-BR100)
for BDV-E570/BDV-T57
Standards Compliance: IEEE 802.11a/b/g/n
Host Interface: USB 2.0
Security: 64/128 bit: WEP, WPA/
WPA2, WPS
Frequency and Channel*: 2.4 GHz - 2.4835 GHz
[CH1 - 11]
5.15 GHz - 5.25 GHz
[CH36 - 48]
5.25 GHz - 5.35 GHz
[CH52 - 64]
5.47 GHz - 5.725 GHz
[CH100 - 140]
5.725 GHz - 5.85 GHz
[CH149 - 165]
Data Rate**: 802.11a/g: 54, 48, 36, 24,
18, 12, 9 and 6 Mbps
802.11b: 11, 5.5, 2 and 1
Mbps
802.11n: up to 300 Mbps
(40 MHz/spatial streams:
2)
Power consumption: Tx: up to 500 mA
Mass (Approx.): USB Wireless LAN
Adapter: 27 g (1 oz)
Dimensions (Approx.) (w × h × d):
USB Wireless LAN
Adapter: 96 mm × 14 mm
× 27 mm (3
7
/8 in ×
9
/16 in ×
1
1
/8 in)
* The frequency and channel differ depending on the
area.
**The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the configuration of
products, the radio wave conditions, the line traffic,
and the products that you use. The transmission may
also be cut off depending on the radio wave
conditions. The standard values of the transmission
speed are the theoretical maximum values for the
wireless standards. They are not the actual speeds of
data transmission.
Design and specifications are subject to change
without notice.
• Standby power consumption 0.3 W.
Halogenated flame retardants are not used in the
certain printed wiring boards.
• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.