Sony 85P VCR User Manual


 
Chapter 4 Menu Settings 51
Chapter 4 Menu Settings
Changing Menu Settings
This section explains how to change menu settings.
Buttons Used to Change
Settings
Use the following buttons on the menu control panel to
change the menu settings.
Changing the Settings of Basic
Items
The factory default setting is to display only basic
items. To change the settings of basic items proceed as
follows.
1 Press the MENU button on the menu control panel.
The menu selection level display appears on the
monitor, with “SETUP MENU” selected (shown in
reverse video).
The time counter display of this unit shows only
the currently selected item. When the item name is
long, it is abbreviated.
Menu selection level display
Setup menu
SYSTEM MENU
SETUP MENU
AUTO FUNCTION
HOURS METER
2 Press the ÷ button.
This displays all items in the menu level 1.
Level-1 menu display
Operational
SETUP MENU
OPERATIONAL FUNCTION
DISPLAY CONTROL
TIME CODE
MENU GRADE
:BASIC
3 Press the or ˘ button, to select the required
item.
Example: Display when “DISPLAY CONTROL” is selected
Display
SETUP MENU
OPERATIONAL FUNCTION
DISPLAY CONTROL
TIME CODE
MENU GRADE
:BASIC
Menu control buttons Functions
MENU button • Opens the menu and launches
menu control mode.
• Closes the menu and exits menu
control mode.
˘ and buttons These buttons move the
highlighted cursor up and down
within the current level to select
an item or setting. Hold down one
of these buttons to make the
highlighted cursor move
continuously.
¿ and ÷ buttons • Press the ÷ button to go down
one level.
• Press the ¿ button to go up
one level.
Hold down one of these buttons to
make the highlighted cursor move
continuously.
RESET (NO) button • Returns the setting to the factory
default setting.
• Sends a negative response to
prompts on the monitor screen.
SET (YES) button • Saves the new setting in
memory.
• Sends a positive response to
prompts on the monitor screen.
Time counter display
Monitor screen
Time counter display
Monitor screen
Time counter display
Monitor screen
(Continued)
9
8
2,4,6
3,5,7
1
SYNC PHASE SC PHASE MENU
MONITOR SELECT
RESET(NO)
SET(YES)
CH-
1/2
CH-
3/4
CH-
1/3
CH-
2/4
MIX
TC PRESET