Filter
Top Products
KDL-32EX305/32EX306/32EX405/40EX405/40EX406/46EX405 21
SERVICE ADJUSTMENTS
2-2-2. SELECTING THE MODEL
After replacing the BAL Board or LCD Panel, go into Service Mode to set
the Model data value.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press
JUMP
or
OPTIONS
on the Remote
Commander.
DIGITAL SERVICE
001 OP
000VERS ---
<MAIN> <SUB>
DM1.301J00AA SM1.010W00AA
M2.105C SB1.000W00AA
DD1.016J00AA SD1.010W00AA
(DM1.301J00AA) RF01.05
WP00.521J00AA ID1C117081
ID1C117081 LTY320AB01
PID04020000
WF:2.0.0.99 <BEM>
WF:0B BM1.012W00LU
Camera FW BB1.000W00LU
Camera FW BD1.011J46LUX
---.---------
4. Press
2
to move to the 002 MODEL (Next) category.
DIGITAL SERVICE
002 MODEL
000 SEG 01: 2a-3
5. Using the table, press
3
to increase the data value or
6
to decrease the data value, to match the model of the TV.
Chassis Model Name
䎧
䎧䏄䏗䏄䎃䎹䏄䏏䏘䏈 䎦䏒䏇䏈䎃䎱䏄䏐䏈
AZ1-L KDL-32EX305 14 3a-2
AZ1-L KDL-32EX306 14 3a-2
AZ1-L KDL-32EX405 14 3a-2
AZ1-L KDL-40EX405 14 3a-2
AZ1-L KDL-40EX406 14 3a-2
AZ1-L KDL-46EX405 14 3a-2
DIGITAL SERVICE
002 MODEL
000 SEG 14: 3a-2
Data Value
Code Name
6. Proceed to “Selecting the Destination”.