Filter
Top Products
23
Hookups and Settings
z
Check the following settings:
– “Audio Output Priority” is set to “HDMI” in the
“Audio Settings” setup (page 50).
– “Audio (HDMI)” is set to “Auto” in the “Audio
Settings” setup (page 50).
b
Not all HDMI-compatible AV amplifiers
(receivers) accept 8ch Linear PCM signals. Refer as
well to instruction manual supplied with the
connected AV amplifier (receiver).
If your AV amplifier (receiver) has a Dolby
*1
Digital, Dolby Pro Logic, or DTS
*2
decoder and
a digital input jack, you can enjoy Dolby Digital (5.1ch), Dolby Pro Logic (4.0ch), or DTS
(5.1ch) surround effects.
1 Connect the digital jack of the player
and your AV amplifier (receiver).
2 Set “Audio Output Priority” to
“Coaxial/Optical” in the “Audio
Settings” setup (page 50).
Connecting to digital jacks (OPTICAL/COAXIAL)
AV amplifier (receiver)
Optical digital cable
(not supplied)
Blu-ray Disc/DVD player
Coaxial digital cable
(not supplied)
or
: Signal flow
,continued