Filter
Top Products
27
Settings and Adjustments
DSD Output Mode
On: Outputs DSD signals from the HDMI
OUT jack when playing a Super Audio
CD. When “On” is selected, no signal is
output from other jacks.
Off
: Outputs PCM signals from the HDMI
OUT jack when playing a Super Audio
CD.
BD Audio MIX Setting
On: Outputs the audio obtained by mixing the
interactive and secondary audio to the
primary audio.
Off: Outputs the primary audio only. Select
this to output HD audio signals to an AV
amplifier (receiver).
Dolby Digital
Downmix PCM: Converts to output Linear
PCM signals. Select this when
connecting an audio device without a
built-in Dolby Digital decoder.
Dolby Digital
: Select this when connecting
an audio device with a built-in Dolby
Digital decoder.
DTS
Downmix PCM: Converts to output Linear
PCM signals. Select this when
connecting to an audio device without a
built-in DTS decoder.
DTS
: Select this when connecting to an audio
device with a built-in DTS decoder.
DTS Neo:6
Cinema: Outputs the simulated multi-channel
sound from 2 channel sources via the
HDMI OUT jack according to the
capability of the connected device using
“DTS Neo:6 Cinema” mode.
Music: Outputs the simulated multi-channel
sound from 2 channel sources via the
HDMI OUT jack according to the
capability of the connected device using
“DTS Neo:6 Music” mode.
Off
: Outputs the sound with its original
number of channels via the HDMI OUT
jack.
Audio DRC
Auto: Performs playback at the dynamic
range specified by the disc (BD-ROM
only). Other discs are played back at the
“On” level.
On: Performs playback at a standard
compression level.
Off: No compression works. A more dynamic
sound is produced.
Downmix
Surround: Outputs audio signals with
surround effects. Select this when
connecting an audio device that supports
Dolby Surround (Pro Logic) or DTS
Neo:6.
Stereo
: Outputs audio signals without
surround effects. Select this when
connecting an audio device that does not
support Dolby Surround (Pro Logic) or
DTS Neo:6.
BD/DVD Viewing
Settings
BD/DVD Menu
Selects the default menu language for BD-
ROMs or DVD VIDEOs.
When you select “Select Language Code,”
the display for entering the language code
appears. Enter the code for your language by
referring to “Language code list” (page 37).
Audio
Selects the default track language for BD-
ROMs or DVD VIDEOs.
When you select “Original,” the language
given priority in the disc is selected.
When you select “Select Language Code,”
the display for entering the language code
appears. Enter the code for your language by
referring to “Language code list” (page 37).
,continued