Filter
Top Products
34
US
Listening to the Radio
1 Press FUNCTION repeatedly until “FM”
appears in the front panel display.
2 Select the radio station.
Automatic tuning
Press and hold TUNING +/– until the auto
scanning starts.
[Auto Tuning] appears on the TV screen.
Scanning stops when the system tunes in a
station.
To cancel automatic tuning, press any
buttons other than VOL +/–.
Manual tuning
Press TUNING +/– repeatedly.
3 Adjust the volume by pressing
VOL +/–.
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
1 Press OPTIONS.
The option menu appears on the TV screen.
2 Press X/x to select [FM Mode], then
press .
3 Press X/x to select [Monaural].
• [Stereo]: Stereo reception.
• [Monaural]: Monaural reception.
4 Press .
The setting is made.
• You can set [FM Mode] to each preset station
separately.
To turn off the radio
Press "/1.
You can preset up to 20 stations. Before tuning,
make sure to turn down the volume to minimum.
1 Press FUNCTION repeatedly until “FM”
appears in the front panel display.
2 Press and hold TUNING +/– until the
auto scanning starts.
Scanning stops when the system tunes in a
station.
3 Press OPTIONS.
The option menu appears on the TV screen.
4 Press X/x to select [Preset Memory],
then press .
5 Press X/x to select the preset number
you want, then press .
6 Repeat Steps 2 to 5 to store other
stations.
To change a preset number
Select the desired preset number by pressing
PRESET +/–, then perform the procedure from
Step 3.
1 Press FUNCTION repeatedly until “FM”
appears in the front panel display.
The last received station is tuned in.
2 Press PRESET +/– repeatedly to select
the preset station.
The preset number and frequency appear on
the TV screen and front panel display.
Each time you press the button, the system
tunes in one preset station.
•You can select the preset station number directly
by pressing the number buttons.
• Each time you press DISPLAY, the display in
the front panel display changes as follows:
Frequency t Preset number t Decoding
status* t Frequency t …
*Appears when [Sound Effect] is set to [Dolby
Pro Logic], [DTS Neo:6 Cinema], or [DTS
Neo:6 Music] (page 44).
Tuner
Presetting radio stations
Selecting a preset station