Filter
Top Products
2-1 Control Panel
2-2 Chapter 2 Locations and Functions of Parts and Controls
Chapter 2 Locations and Functions of Parts and Controls
2-1-1 Upper Control Panel
Upper control panel
1 DISPLAY FULL/FINE button
Changes the display range of the audio level meters.
FULL: Display range is –60 to 0 dB (peak level = 0
dB) or –40 to +20 dB (peak level = +20 dB).
Use 806. LEVEL METER SCALE in the VTR
SETUP menu to select the range.
FINE: Displays the audio level in 0.25 dB
increments. The center LED lights up in each
meter as a signal level reference. When the level
exceeds the maximum display value, the top LED
lights up. When the level falls below the
minimum display value, the bottom LED lights
up.
2 PHONES jack
Connects stereo headphones with 8 Ω impedance for
audio monitoring during recording, playback, and
editing. Adjust the headphone output level with the
PHONES level control.
3 POWER switch
Turns on the power. When the power is turned on, the
audio level meters and menu display in the lower
control panel light up.
!£REMOTE buttons and RS-232C indicator
!™VIDEO INPUT SELECT buttons
!¡AUDIO INPUT/MONITOR SELECT buttons
!ºINPUT SELECT button
8Indicator window
9MONITOR SELECT button
1DISPLAY FULL/FINE button
2PHONES jack
3POWER switch
4PHONES level control
5 PB level
controls
6REC level controls
7Audio level meters