Filter
Top Products
Menu List
A-12 Appendix
Appendix
FWD
+3
+1
RVS
-1
-3
FWDRVS
TYPE2
FWD
+3
RVS
-3
FWDRVS
TYPE3
FunctionItem Settable rangeItem number
109 FORCED EE
WHEN TAPE
UNTHREAD
[on]
off
[0]
1
Specifies whether program play mode is enabled or not.
0: Program play mode is disabled.
1: Program play mode is enabled.
[disable]
enable
[0]
1
PROGRAM
PLAY
111
115
(DVW-A500/1
and A500P/1)
PHASE LOCK IN
VARIABLE × 3
Specifies whether the capstan phase servo is locked during
the variable-speed mode of 3 times normal speed.
0: Capstan phase servo is not locked during the variable-
speed mode of 3 times normal speed.
1: Capstan phase servo is locked during the variable-speed
mode of 3 times normal speed.
[0]
1
116
JOG DIAL
RESPONSE
[0]
1
2
Selects the tape speed (VTR command) characteristics for
search dial rotation.
0: Tape speed changes linearly in a range of –1 to +1 times
normal tape speed.
1: Tape speed changes in a range of –3 to +3 times normal
tape speed as shown below in TYPE 2. (Tape speed
does not change when the search dial is within a range
of ±1 times normal tape speed.)
2: Tape speed changes linearly in a range of –3 to +3 times
normal tape speed as shown below in TYPE 3.
[off]
on
117
CONTROL
PANEL
SELECTION
Specifies which control panel is enabled when the
CONTROL PANEL switch on the system setup panel is set
to ‘EXT’.
0: Only the control panel that is connected to the external
control connector on the connector panel is enabled.
1: Both the control panel of this unit and the equipment
connected to the external control connector on the
connector panel are enabled.
[0]
1
[TYPE1]
TYPE 2
TYPE 3
[swselectionEXT]
parallel control
( )
speed
speed
rotation
rotation
Specifies whether the unit automatically changes to PB/EE
mode whenever PB/EE is selected with the ALT/[F2] (PB/
EE) button on the lower control panel during tape threading
and unthreading modes and when tape is not inserted.
0: The ALT/[F2] (PB/EE) button in the HOME menu does
not control the PB/EE mode.
(The E-E mode signal is output at all times.)
1: The ALT/[F2] (PB/EE) button in the HOME menu controls
the PB/EE mode.