Filter
Top Products
17
Getting Started
Preparation of Satellite Speakers Wall-Mounting
The Satellite Speakers can be installed on a wall by using a Wall-Mount Bracket (sold separately).
1 Before mounting the Satellite Speakers on a wall, you must remove the stand from the Satellite
Speakers.
~
• Use a screwdriver to remove the Satellite Speakers Stand.
2 To install the Satellite Speakers on a wall, you should use the Wall-Mount Bracket WS-WV10D (sold
separately). For this accessory use only the screw that is attached to the Satellite Speakers. Use a
screwdriver to remove the screw from the Satellite Speakers.
~
• If you use an electric screwdriver, set the torque for tightening at approximately 1.5 N·m {15Kgf·cm}.
• Be sure to store the removed screws and the Satellite Speakers Stand in a safe place until you are ready to reattach the
stand to the Satellite Speakers. Keep the screws away from children.
~
• Do not remove the Satellite Speakers Stand for any reason other than to wall-mount the Satellite Speakers.
(Continued)