Filter
Top Products
55
Recording TV programs using the VCR Plus+
®
system (SLV-D550P only)
Basic Operations
Recording TV programs using the VCR
Plus+
®
system (SLV-D550P only)
Just enter the PlusCode number listed in the
TV program guide. The date, time and
channel number of that program are set
automatically. You can preset up to eight
programs together with the DIAL TIMER
and manual timer settings at one time.
Before you start…
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
•Set TV
/ DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
VCR (page 10).
• When using a cable box, turn it on.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1
Press VCR Plus+.
2
Press V/v to select “Enter code.”
VCR Plus+
V/v/B/b
ENTER
Number
buttons
O RETURN
RETURN
VCR PLUS+
SET UP
ENTER
Enter code
with [0~9]
Mode
Speed
[ --------- ]
[Once]
[Auto]
B
V
v
V
continued