Filter
Top Products
18
GB
Getting Started
Caution
• Contact a screw shop or installer for information regarding the wall material or screws to be used.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam. Install the speakers on a vertical and flat wall where reinforcement is applied.
• Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
1 Connect the speaker cord with the color tube to 3, and the speaker cord without the
color tube to #.
2 Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
When installing the speakers on a wall
Color tube
Front left speaker (L): White
Front right speaker (R): Red
Center speaker: Green
Surround left speaker (L): Blue
Surround right speaker (R): Gray
30 mm
4 mm
Hole on the back of
the speaker
5 mm
10 mm