Filter
Top Products
DRX-820UL-T
2-680-628-11 (1)
masterpage:Right
13
Setup
F:\SuzukiA\#5120839_DRX-820UL-T\2680628111\2680628111_DRX820UL-T_OI\GB05SET.fm
3 Connect the other end of the i.LINK cable to your computer.
Note
Please connect the drive directly to your computer.
4 Insert the supplied software disc into the DVD/CD rewritable
drive and install the software.
Refer to the Software Quick Start Guide for details.
The disconnection procedure varies depending on your OS.
Windows
When your computer detects the drive successfully, appears on the
Windows task bar. When you want to disconnect the drive, you must first stop
it using this icon.
1 Click on the task bar, and click the drive to be disconnected
on the shortcut menu.
2 Operate following the message displayed, if any.
3 Disconnect the i.LINK cable.
Note
If you disconnect the i.LINK cable without performing the procedure above, your computer
may operate erratically or data may be damaged. Be sure to perform the procedure above
before disconnecting the i.LINK cable.
Mac OS
With Mac OS X, first confirm that there is no disc in the drive. Confirm that the drive’s busy
indicator is not lit, and then disconnect the i.LINK cable.
Disconnection
GB01COV1.book Page 13 Friday, January 13, 2006 3:49 PM