Filter
Top Products
14
DRX-820UL-T
2-680-628-11 (1)
masterpage:Left
F:\SuzukiA\#5120839_DRX-820UL-T\2680628111\2680628111_DRX820UL-T_OI\GB05SET.fm
Connection through USB
Note
This product including bundled software functions properly under Windows XP, Windows
2000, and Mac OS X (10.2 or later).
It may not fulfill all functional and performance specification under other OS (operating
system) environment.
• Refer to the list of contents to verify that the package contents are complete.
• If your computer is not equipped with a USB connector, install a USB
interface card.
• Have the manual for your computer handy.
These instructions apply to most commonly used computers.
For connection cautions, refer to the “Installation” section in “Connection
through i.LINK” on page 11.
1 Start your computer.
2 Connect the necessary cables, then turn on the drive.
• Connect the USB cable to the drive’s USB connector.
• Connect the supplied AC power cord to the supplied AC adapter. Then
connect the AC adapter to the drive’s DC IN jack, and connect the power
cord to the power outlet.
Before Connection
Installation
Power Switch
USB Cable
AC adapter
AC power cord
GB01COV1.book Page 14 Friday, January 13, 2006 3:49 PM