32
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
1 Turn on your TV.
2 Press [/1.
The player turns on.
3 Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
4 Press A on the player, and place a
disc on the disc tray.
5 Press H.
The disc tray closes. The player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 35. For VIDEO CDs,
see page 38.
To enjoy the clarity of Super Audio CD/CD
sound more (DVP-NS955V only)
You can minimize the effect of the video
output by switching it off.
Press VIDEO ON/OFF, so that the VIDEO
OFF indicator lights up on the player.
To cancel the setting, press VIDEO ON/OFF
again.
To turn off the player
Press [/1. The player enters standby mode.
z Hint
The player turns off automatically whenever you
leave it in stop mode for more than 30 minutes.
(Auto Power Off function)
Note
Super Audio CD audio signals are not output from
the DIGITAL OUT jacks.
H
[/1
DVP-LS785V
VIDEO
ON/OFF
(DVP-
NS955V
only)
Z
[/1
H
A
DVP-NS955V
[/1
A
H/
Playback
Dial
Playback side facing down