Sony DVP-NC625 DVD Player User Manual


 
29
Playing Discs
Resuming Playback from
the Point Where You
Stopped the Disc (Resume
Play/Multi-disc Resume)
The player remembers the point where you
stopped the disc.
Resuming playback for the
current disc (Resume Play)
The player remembers the point where you
stopped the disc even if the player enters
standby mode by pressing [/1.
1 While playing a disc, press x to stop
playback.
“RESUME” appears on the front panel
display.
2 Press H.
The player starts playback from the point
where you stopped the disc in Step 1.
z Hint
To play from the beginning of the disc, press x
twice, then press H.
Notes
The resume playback point for the current disc is
cleared when:
– you change the play mode.
– you do Program Play or Shuffle Play.
– you change the settings on the Setup Display.
When playing a CD and DVD-RW (VR mode),
the point where you stopped is cleared when :
– you press DISC SKIP or DISC SELECT.
– you opened the disc tray.
– you disconnect the power cord.
When playing a DATA CD, the point where you
stopped is cleared when the player enters standby
mode, the disc tray is opened, or the mains lead is
disconnected.
This function may not work with some discs.
Storing the point where you
stopped the disc (Multi-disc
Resume)
The player stores the point where you stopped
the disc and resume playback from the same
point the next time you insert the same disc.
The player remembers the stopped point of
the disc even after you play other discs in the
disc tray.
Resume playback points for up to 6 different
DVD/VIDEO CD discs remain in memory
even if you disconnect the power cord. When
you store a resume playback point for the 7th
disc, the resume playback point for the first
disc is deleted.
z Hints
To play from the beginning of the disc, press x
twice, then press H.
To turn off the Multi-disc Resume function, set
“MULTI-DISC RESUME” in “CUSTOM
SETUP” to “OFF” (page 64). Playback restarts at
the resume point only for the current disc in the
player.
Notes
“MULTI-DISC RESUME” in “CUSTOM
SETUP” must be set to “ON” (default) for this
function to work (page 64).
This function may not work with some discs.
If “MULTI-DISC RESUME” in “CUSTOM
SETUP” is set to “ON” and you playback a
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point. To play from the beginning, press
x twice and then press H.