Filter
Top Products
49
Sound Adjustments
Displaying the audio information
of the disc
Press DISPLAY during playback to display
the Control Menu. Select “AUDIO” using
X/x. The channels being played are displayed
on the screen.
For example, in Dolby Digital format,
multiple signals ranging from monaural to 5.1
channel signals can be recorded on a DVD
VIDEO. Depending on the DVD VIDEO, the
number of the recorded channels may differ.
*“PCM,” “MPEG,” “DTS,” or “DOLBY
DIGITAL” is displayed.
In the case of “DOLBY DIGITAL,” the
channels in the playing track are displayed
by numbers as follows:
For Dolby Digital 5.1 ch:
**The letters in the programme format
display indicate the following sound
components:
L: Front (left)
R: Front (right)
C: Centre
LS: Rear (left)
RS: Rear (right)
S: Rear (monaural): The rear
component of the Dolby
Surround processed signal and
the Dolby Digital signal
LFE: Low Frequency Effect signal
z Hint
For Dolby Digital and DTS, “LFE” is always
enclosed in a solid line regardless of the LFE signal
component being output.
Note
If “DTS” is set to “OFF” in “AUDIO SETUP,” the
DTS track selection option will not appear on the
screen even if the disc contains DTS tracks (page
66).
DVD VIDEO
PLAY
1: ENGLISH
1 8
(
3 4
)
1 2
(
2 7
)
1
T
1 : 3 2 : 5 5
LRC
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
LFE
LS RS
Current audio format*
Currently playing programme format**
DOLBY DIGITAL
3 / 2 . 1
LFE (Low Frequency
Effect) component 1
Rear component 2
Front component 2+
Centre component 1