Sony DVP-NC800H DVD Player User Manual


 
66
US
“Data error” appears on the TV screen
when playing a DATA CD/DATA DVD.
, The MP3 audio track/JPEG image file you
want to play is broken.
, The data is not MPEG-1 Audio Layer III
data.
, The JPEG image file format does not
conform to DCF (page 47).
, The JPEG image file has the extension
“.JPG” or “.JPEG,” but is not in JPEG
format.
The CONTROL FOR HDMI function does
not work.
, When HDMI indicator does not light up on
the front panel, check the HDMI connection
(page 15).
, Set the “CONTROL FOR HDMI” setting in
“HDMI SETUP” to “ON” (page 62).
, Make sure that the connected component is
compatible with the CONTROL FOR
HDMI function. Please refer to the
operating instructions of the component for
detailed explanation.
, If you change the HDMI connection,
connect and disconnect the AC power cord,
or if a power failure occurs, turn on all
components connected to HDMI, and set
“CONTROL FOR HDMI” setting in
“HDMI SETUP” to “OFF,” then set the
“CONTROL FOR HDMI” setting in
“HDMI SETUP” to “ON” (page 62).
‘BRAVIA Sync’ display does not appear.
, Turn off any display of the DVD player
displays. Then, try again.
, Please return to the one screen mode if your
TV is in two screen mode. Then, try again.
Display language on the screen switches
automatically.
,
When “LANGUAGE FOLLOW” is set to
“ON” in the “HDMI SETUP” (page 62), the
display language on the screen automatically
switches, according to the language setting
of the connected TV, if you change the
language settings on your TV, etc.
The DVD player turns on automatically.
, HDMI input is selected using TV Interface.
Some TV has this function for CONTROL
FOR HDMI.
, “CONTROL FOR HDMI” in “HDMI
SETUP” is set to “ON” (page 62).
Self-diagnosis Function
(When letters/numbers appear in the
display)
When the self-diagnosis function is activated
to prevent the player from malfunctioning, a
five-character service number (e.g., C 13 50)
with a combination of a letter and four digits
appears on the screen and the front panel
display. In this case, check the following
table.
First three
characters of
the service
number
Cause and/or corrective
action
C 13 The disc is dirty or recorded
in a format that this player
cannot play (page 6).
,Clean the disc with a
cleaning cloth or check its
format.
C 31 The disc is not inserted
correctly.
,Re-insert the disc
correctly.
E XX
(xx is a number)
To prevent a malfunction, the
player has performed the
self-diagnosis function.
,Contact your nearest
Sony dealer or local
authorized Sony service
facility and give the 5-
character service number.
Example: E 61 10
C:13:50