Filter
Top Products
66
US
The HDMI CONTROL function does not
work.
, When HDMI indicator does not light up on
the front panel, check the HDMI connection
(page 17).
, Set the “HDMI CONTROL” setting in
“CUSTOM SETUP” to “ON” (page 60).
, Make sure that the connected component is
compatible with the HDMI CONTROL
function. Please refer to the operating
instructions of the component for detailed
explanation.
, If you change the HDMI connection,
connect and disconnect the AC power cord,
or have a power failure, set the “HDMI
CONTROL” setting in “CUSTOM
SETUP” to “OFF,” then set the “HDMI
CONTROL” setting in “CUSTOM
SETUP” to “ON” (page 60).
Display language on the screen switches
automatically.
, When “LANGUAGE FOLLOW” is set to
“ON” in the “CUSTOM SETUP” (page 60),
the display language on the screen
automatically switches, according to the
language setting of the connected TV, if you
change the language settings on your TV,
etc.
The DVD player turns on automatically.
, HDMI input is selected using TV Interface.
Some TV has this function for HDMI
CONTROL.
, “HDMI CONTROL” in “CUSTOM
SETUP” is set to “ON” (page 60).
Self-diagnosis Function
(When letters/numbers appear in the
display)
When the self-diagnosis function is activated
to prevent the player from malfunctioning, a
five-character service number (e.g., C 13 50)
with a combination of a letter and four digits
appears on the screen and the front panel
display. In this case, check the following
table.
First three
characters of
the service
number
Cause and/or corrective
action
C 13 The disc is dirty or recorded
in a format that this player
cannot play (page 8).
,Clean the disc with a
cleaning cloth or check its
format.
C 31 The disc is not inserted
correctly.
,Re-insert the disc
correctly.
E XX
(xx is a number)
To prevent a malfunction, the
player has performed the
self-diagnosis function.
,Contact your nearest
Sony dealer or local
authorized Sony service
facility and give the 5-
character service number.
Example: E 61 10
C:13:50