Filter
Top Products
9
Getting Started
Notes
• Refer to the instructions supplied with the component to be
connected.
• Do not connect this player to a video deck. If you view the
pictures on your TV after making the connections shown
below, a picture noise may appear.
• Depending on the TV or receiver (amplifier), sound distortion
may occur because the audio output level is high. In this case,
set “AUDIO ATT” in “AUDIO SETUP” to “ON” in the setup
display. For details, see page 47.
Connect
directly
VCR
TV
CD/DVD
player
Setups for the player
Some setups are necessary for the player depending on
the TV or other components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 39.
• If the color system of the TV is NTSC or DUAL
Since the color system of the unit is set to NTSC, you
can use the unit as it is.
• If the color system of the TV is PAL
To set the unit to PAL, turn on the unit while pressing
the P button of the unit. To reset to NTSC, turn off the
unit and then turn on as described above.
• To connect the player to a wide-screen TV
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to “16:9” (default setting). For details, see page
43.
• To connect the player to a normal TV
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to “4:3 LETTER BOX” or “4:3 PAN SCAN.”
For details, see page 43.