Sony DVP-SR200P/B DVD Player User Manual


 
10
US
To connect to your audio component
Use the following pattern.
z
For correct speaker location, see the operating
instructions supplied with the connected
components.
If your audio component has a Dolby*
1
Digital or DTS*
2
decoder and a digital input
jack, use this connection. You can enjoy
Dolby Digital (5.1ch) and DTS (5.1ch)
surround effect.
*1
Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
*2
Manufactured under license under U.S. Patent #:
5,451,942 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital Out are
registered trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc. © 1996-
2007 DTS, Inc. All Rights Reserved.
b
After you have completed the connection, make
the appropriate settings in Quick Setup (page 12).
Otherwise, no sound or a loud noise will come
from your speakers.
The TVS effects of this player cannot be used
with this connection.
In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the AUDIO OUT L/R jacks, even
if you set “DTS” to “ON” in Quick Setup
(page 12).
Step 2: Connecting the
Power Cord
Plug the player and TV power cords into an
AC outlet.
Step 3: Preparing the
Remote
You can control the player using the supplied
remote. Insert two Size AA (R6) batteries by
matching the 3 and # ends on the batteries
to the markings inside the compartment.
When using the remote, point it at the remote
sensor on the player.
b
Do not leave the remote in an extremely hot or
humid place.
Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
Do not expose the remote sensor to direct light
from the sun or a lighting apparatus. Doing so
may cause a malfunction.
If you do not use the remote for an extended
period of time, remove the batteries to avoid
possible damage from battery leakage and
corrosion.
VIDEO
P
B
Y
L
R
P
R
VIDEO OUT
AUDIO OUT
COMPONENT
VIDEO OUT
COAXIAL
DIGITAL
OUT
COAXIAL
DIGITAL
OUT
to DIGITAL OUT
(COAXIAL)
CD/DVD player
Coaxial digital cable
(not supplied)
to coaxial
digital input
Audio component
with a decoder
: Signal flow