Filter
Top Products
Chapter 12 Setup Menus
12-2 Chapter 12 Setup Menus
To display setup menus
With the function menu HOME page showing in the
menu display, press the F5 (MENU) button.
The currently selected setup menu item is displayed in
the menu display, with the menu item number flashing.
For basic operations in the menu display, see page 2-7.
12-2 Setup Menu Operations
ASSEMBLE
MULTI
CONTROL
RECORDER
PLAYER
HOME
CHANNEL
CONDITION
F1 F2 F3 F4 F5 F6
RESET
PUSH/
SHIFT
ALARM
KEY INHI
VIDEO
TC CH1 CH2 CH3 CH4 CUE
VID. INPB/EE CONFI CTL/TC
Y-R,B
PB
OFF TC
MENU
TCGSET
HOME button F5 (MENU) button
Function menu HOME page
SELECT SET EXIT
SET
UP
H01 : OPE HOURS
O
To display menus on the monitor
Setting CHARA to ON in function menu page 4 allows
you to display setup menus on the monitor connected
to the COMPOSITE VIDEO OUTPUT 3 (SUPER)
connector or SDI OUTPUT 3 (SUPER) connector of
this unit. When a setup menu appears on the monitor, a
cursor indicates the currently selected menu item.
Customizing the setup menu
You can customize the setup menu so that items which
you do not use are not displayed.
“[C]” appears in the upper right of the monitor when
the menu is customized (when there are items which
are not displayed). However, there is no indication in
the menu display section that the menu has been
customized.
For details about how to customize the setup menu, refer to
the Maintenance Manual.
Displaying a desired menu item
When the menu item number displayed in the menu
display is flashing, you can change the menu item by
turning the MULTI CONTROL knob.
To skip from one item group to the next, press the v
button or V button.
Group name for the
currently selected item
Cursor indicating
the currently
selected item
TC
ASSEMBLE
MULTI
CONTROL
RECORDER
PLAYER
HOME
CHANNEL
CONDITION
F1 F2 F3 F4 F5 F6
RESET
PUSH/
SHIFT
ALARM
KEY INHI
VIDEO
CH1 CH2 CH3 CH4 CUE
SET
UP
001:P–ROLL
SELECT
SET EXIT
5S
TIME
–
MULTI
CONTROL knob
v and V buttons
Setup menu item H01 displayed