Chapter 3 Preparations
Chapter 3 Preparations 3-13
Notes
• Prevent metallic objects or your finger from coming
into contact with the terminal of the connecting
section.
•Do not attach any material other than the supplied
label to the label space.
•Attach the label at the prescribed labeling position.
Make sure the label is attached at the labeling
position properly.
• Do not bend, drop, or apply strong shock to a
Memory Stick.
• Do not disassemble or modify a Memory Stick.
• Do not let the Memory Stick get wet.
• Do not use or keep a Memory Stick in locations that
are:
– Extremely hot such as in a car parked in the sun
–Under direct sunlight
–Very humid or subject to corrosive gases
•When you carry or store a Memory Stick, keep it in
its case.
During access to data
While data are being read from or written to the
Memory Stick, do not shake this unit or subject it to
shock. Do not turn off the power of the unit or remove
the Memory Stick. This may damage the data.
For details, refer to the Maintenance Manual.
Memory Stick and are the trademarks of
Sony Corporation.
MagicGate Memory Stick and
are the
trademarks of Sony Corporation.