Filter
Top Products
21
Preparing Power Sources
Chapter 3 Preparations
3-1-2 Using the BP-GL65/GL95
Battery Pack
Attaching a battery pack
Attach the BKP-L551 Battery Adaptor to the side panel of
this unit and attach the BP-GL65/GL95 Battery Pack in it.
The BP-L60(A)/L90(A) and BP-M50/M100 can also be
attached in the same way.
For details on attaching the BKP-L551, refer to the
installation manual for the BKP-L551.
1
Remove the two screws on the side panel.
2
Attach the BKP-L551 to the side panel.
3
Align the grooves on the BP-GL65/GL95 with the
projections on the BKP-L551.
4
Slide the BP-GL65/GL95 as shown below so that the
connectors on the BP-GL65/GL95 and the BKP-L551
are connected.
5
Connect the DC cable of the BKP-L551 to the DC IN
12V connector.
Removing the battery pack
With the lever pushed in, slide the BP-GL65/GL95 out as
shown below.
The BP-L60(A)/L90(A) and BP-M50/M100 can also be
removed in the same way.
Screws
BKP-L551
BP-GL65/GL95
Lever