Sony HKDV-507 DVD VCR Combo User Manual


 
Appendix A-27
Appendix
Items Related to Prerolling (401~)
The values enclosed in a box are factory settings.
401
Item number
Item
FUNCTION MODE
AFTER CUE-UP
[stop]
still
Selects the operation mode that the VTR changes to after
completing a cue up operation.
stop: Enters stop mode.
still: Enters still-picture mode (search mode).
Note
When setting the standard constant on the editor and
control the unit, set to stop.
Settable range
403 capstan only
[reel/capstan]
CUEUP BY TC This setting is only active when item 602. is set to TC or
UBIT.
capstan only: The tape runs with the pinch ON during cue
up. (The maximum tape speed is ten times normal tape
speed.)
reel/capstan: The tape runs with the pinch OFF state during
cue up. When the tape nears the cue up point and tape
speed drops to slow, the pinch turns ON.
This setting is only active when item 602. is set to CTL.
capstan only: The tape runs with the pinch ON state during
cue up. (The maximum tape speed is ten times normal
tape speed.)
reel/capstan: The tape runs with the pinch OFF state during
cue up. When the tape nears the cue up point and tape
speed drops to slow, the pinch turns ON.
When this unit is controlled by an editor (BVE-2000/BVE-
9100, etc), and the seting is reel/capstan, cue up
operations are done at high speed.
Select capstan only when editing precision has priority.
CUEUP BY CTL404 [capstanonly]
reel/capstan
405 CUE MENU
DEFAULT MODE
select
[pagemode]
extend mode
Selects the default mode when the CUE menu is opened.
page mode: PAGE mode
extend mode: EXTEND mode
406 CUE MENU
PREROLL
OFFSET
[0sec]
.
.
.
30 sec
Sets the preroll time for a cueing up operation from the
CUE menu.
407
AUTO REWIND
[off]
on
Selects the rewind mode for the end of the tape.
off: The tape transport stops at the end of the tape.
on: The tape is automatically rewound from the end of the
tape.
Function