Filter
Top Products
Getting Started
10
To check to see if the TV tuning is correct
Set the TV to the video channel and press PROGRAM +/– on the VCR. If
the TV screen changes to a different programme each time you press
PROGRAM +/–, the TV tuning is correct.
To obtain a clear picture from the VCR
If the picture does not appear clearly in step 3 above, go to step 4 to finish
this procedure once. Then start from step 1. After pressing RF CHANNEL
in step 1 to display the RF channel, press PROGRAM +/– so that another RF
channel appears. Then tune the TV to the new RF channel until a clear
picture appears.
Step 5 : Tuning your TV to the VCR (continued)