Filter
Top Products
8
Setting up the remote commander
filename[01GB04GET-NP0.fm] model name1[SLV-SE850G(ENG)] model name2[]
[3-062-332-
11
(1)]
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find
the one that works with your TV.
To switch to wide mode, see the footnotes below this table for the applicable code
numbers.
*1
Press WIDE to switch to the wide picture mode you want.
*2
Press WIDE, then press
2
+/– to select the wide picture mode you want.
*3
Press WIDE. The menu appears on the TV screen.Then, press
M
/
m
/
<
/
,
to select the wide picture you
want and press OK.
Notes
• If the TV uses a different remote control system from the one programmed to work with the VCR, you
cannot control your TV with the remote commander.
• If you enter a new code number, the code number previously entered will be erased.
• If you remove the batteries of the remote commander for more than a few minutes, the code number may
be reset to 01 (Sony). In this case, reset the appropriate code number.
Manufacturer Code number
Sony
01
*1
, 02
Akai 68
Blaupunkt 10
C.G.M 09
Ferguson 52
Goldstar 03, 04, 17
Grundig
10
*1
, 11
*1
Hitachi 24
ITT
15, 16, 69
*3
JVC 33
Loewe 45
Mivar 09
NEC 66
Nokia
15, 16, 69
*3
Panasonic
17
*1
, 49
Philips
06
*1
, 07
*1
, 08
*1
Saba 12, 13
Samsung 22, 23
Sanyo 25
Sharp 29
Telefunken 36
Thomson
43
*2
Toshiba 38
Manufacturer Code number