Filter
Top Products
12
GB
* The number 5, MASTER VOL +, TV VOL +, and
H buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
Notes
•Some functions explained in this section may not
work depending on the model.
•The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
R
V/v/B/b
After pressing AMP MENU
(D), DVD MENU (J), or
MENU (N), press V, v, B or
b to select the settings. Then,
press to enter the selection
for DVD MENU or MENU.
Press also to enter the
selection of the receiver,
VCR, satellite tuner, CD
player, or DVD player.
S DISPLAY Press to select the information
displayed on the TV screen of
the VCR, satellite tuner, CD
player or DVD player.
T -/-- Press -/-- and TV (P) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
>10/
x
Press to select
– track numbers over 10 of the
VCR, satellite tuner or CD
player.
– channel numbers of the
Digital CATV terminal.
CLEAR Press to
– clear a mistake when you
press the incorrect numeric
buttons.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.
U Numeric
buttons
(number 5*)
Press to
– preset/tune to preset
stations.
– select track numbers of the
CD player or DVD player.
Press 0/10 to select track
number 10.
– select channel numbers of
the VCR or satellite tuner.
Press the numeric buttons and
TV (P) at the same time to
select the TV channels.
V 2CH Press to select 2CH STEREO
mode.
W A.F.D. Press to select A.F.D. mode.
X AUTO CAL Press to activate the Auto
Calibration function.
Name Function
,
Name Function
Y TV/VIDEO Press TV/VIDEO and TV
(P) at the same time to select
the input signal (TV input or
video input).
SLEEP Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.