Filter
Top Products
To automatically pair the Smart Imaging Stand with an Android™ phone
1
Turn on the Smart Imaging Stand.
2
Make sure the Smart Connect application and the Smart Imaging Stand
application are successfully installed on the phone.
3
Make sure the phone screen is active and that the NFC function in the phone is
turned on.
4
Place the phone over the Smart Imaging Stand so that the NFC detection area
of each device touches the other.
5
Follow the instructions that appear on the phone screen.
In step 5, please ignore the request to verify the Bluetooth passkey on the Smart Imaging
Stand, and just tap the Pair button.
To manually pair the Smart Imaging Stand with an Android™ phone
1
Turn on the Smart Imaging Stand, then press and hold down the Bluetooth®
button until it blinks rapidly.
2
Android™ phone: Make sure the Smart Connect application and the Smart
Imaging Stand application are successfully installed.
3
Turn on Bluetooth®, then scan for nearby devices and select Smart Imaging
Stand in the list of available devices.
4
Follow the instructions that appear on the screen.
In step 4, please ignore the request to verify the Bluetooth passkey on the Smart Imaging
Stand, and just tap the Pair button.
Connecting your Smart Imaging Stand with an Android™ phone
After you install the necessary applications and successfully pair the Smart Imaging
Stand with an Android™ phone, you are ready to connect the devices and start using
them together. You can establish a connection between the two devices
automatically (using NFC technology) or manually (using the Smart Connect
application).
8
This is an Internet version of this publication. © Print only for private use.