Filter
Top Products
47
SETUP SETUP SETUPRemote Control SETUPSETUP
Button Description
1 MUTING Press to mute the sound. Press again or press VOL+ to restore the sound.
2
SYSTEM OFF Press to turn off all Sony brand audio/video equipment at once. (May not function
with older Sony equipment. Does not function with DVD/VCR combination unit.)
3
TV/VCR/DVD Press to change the VHF/UHF output of the VCR (or DVD/VCR combination unit).
Transport
Buttons
m Rewind
N Play
z Record (press together with N)
x Stop
M Fast forward
X Pause
4 JUMP Press to jump back and forth between two channels. The TV alternates between the
current channel and the last channel that was selected.
5 ANT Press to switch between the sources connected to the TV’s VHF/UHF and CABLE
inputs.
6 SLEEP Press repeatedly until the TV displays the time in minutes (15, 30, 45, 60, or 90) that
you want the TV to remain on before shutting off automatically. To cancel press until
Sleep Off appears. While the Sleep feature is set, press once to display the remaining
time.
7 PICTURE MODE Press repeatedly to cycle through the available video picture modes: Vivid, Standard,
Movie, Pro. Also available in the Video Menu. For details, see “Selecting Video Options”
on page 78.
8 DRC MODE Press repeatedly to cycle through the available Digital Reality Creation modes:
Interlaced, Progressive, CineMotion. Also available in the Video Menu. For details, see
“Selecting Video Options” on pages 78-79.
9
MEMORY STICK Press to display the Memory Stick Menu. For details, see “Using the Memory Stick
Viewer” on page 61. Also available in the Applications Menu (page 92).
0 RESET Press to reset the settings to the factory defaults. See pages 43, 79, and 81. Also used to
clear Favorite Channels (see page 58).
qa VOL +/- Press to adjust the volume.
qs CODE SET Press to program the remote control to operate non-Sony video equipment. For details,
see “Programming the Remote Control” on page 49.
qd POWER
Buttons
VCR/DVD: Press to turn on and off the VCR or DVD player.
SAT/CABLE: Press to turn on and off the satellite receiver or cable box.
TV: Press to turn on and off the TV.
qf FUNCTION
Buttons
The indicator lights up momentarily when pressed to show which equipment the
remote control is operating:
VCR/DVD: Press to have the remote control operate the VCR or DVD player.
SAT/CABLE: Press to have the remote control operate the satellite receiver or cable box.
TV: Press to have the remote control operate the TV.
qg
TV/SAT When the remote control is set to operate the satellite receiver, press to switch between
the satellite receiver’s TV and SAT (satellite) inputs.
When the remote control is set to operate the TV, press repeatedly to step through the
Audio Effect options. Also available in the Audio Menu. For details, see page 80.
XS.book Page 47 Monday, February 7, 2005 8:41 AM