Sony KDF-37H1000 Projection Television User Manual


 
22
Remote Control
Insert two size AA batteries (supplied) by matching e and E on
the batteries to the diagram inside the battery compartment of the
remote control.
~
To avoid possible damage from battery leakage, remove the batteries if you anticipate the remote control will not be
used for an extended period.
Handle the remote control with care. Avoid dropping it, getting it wet, or placing it in direct sunlight, near a heater, or
in high humidity.
Inserting Batteries into the Remote Control
Push to
open
Button Descriptions
Button Description
1 DISPLAY Press once to display the information pertaining to the
channel and/or program when available. The OSD (On
Screen Display) will time out in a few seconds or press again
to immediately turn off the display. You can also set the
display to show minimal information. See Info Banner on
page 38.
2 SLEEP Press repeatedly until the TV displays the time in minutes
(Off, 15min, 30min, 45min, 60min, 90min or 120min)
that you want the TV to remain on before shutting off. To
cancel Sleep Timer, press SLEEP repeatedly until Off
appears.
3 THEATER Press to turn on and off the Theater Mode. This feature
allows you to enjoy the Cinema mode (see page 28) with
your A/V receiver. You must connect an A/V receiver that
supports the HDMI Control. TV’s speakers will be
automatically muted.
4 FREEZE Press once to display the frozen image of the current
program in the left window. The window on the right will
display the current program in progress. Press again to
return to the program.
~
•With the
Freeze
feature active, some features are
unavailable.
• While the Freeze feature is active, pressing HOME will
deactivate the Freeze and display the XMB™.
~
The 5 button and CH + have a tactile dot. Use them as a reference when
operating the TV.
This remote control cannot be programmed to use with other equipment.
1
2
3
4
Frozen
picture
Current
program