Filter
Top Products
29
Using the Menu
Set Up menu
Starts the “first time operation menu” to tune in all the available digital and analogue
channels. Usually you do not need to do this operation because the channels are already
tuned when the TV was first installed ((page 13)). However, this option allows you to repeat
the process (e.g., to retune the TV after moving house, or to search for new channels that
have been launched by broadcasters).
1 Press OK to select “Auto Start Up”.
2 Press OK to select “Yes.”
The auto-tune display appears on the screen.
3 Follow steps 1 to 4 of “Auto-tuning the TV” (13).
Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned when
the TV was first installed (13). However, this option allows you to repeat the process (e.g.,
to retune the TV after moving house, or to search for a new channels that have been launched
by broadcasters).
1 Press OK to select “Auto Tuning”.
2 Follow step 1 and 2 of “Auto-tuning the TV” (13).
When all available analogue channels have been tuned, the TV returns to normal
operation.
Changes the order in which the analogue channels are stored on the TV.
1 Press OK to select “Programme Sorting”.
2 Press M/m to select the channel you want to move to a new position,
then press OK.
3 Press M/m to select the new position for your channel, then press OK.
Repeat the procedure in steps 2 and 3 to move other channels if required.
You can select the options listed below on the Set Up
menu. To select options, see “Navigating through
menus” (page 19).
Auto Start Up
Auto Tuning (Analogue mode only)
Programme Sorting (Analogue mode only)
Select: Set: Back:
OK
End:
MENU
Auto Start Up
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Digital Set Up
Set Up
Continued