Sony KDL-32BX420 Flat Panel Television User Manual


 
24
GB
Using BRAVIA Sync with
Control for HDMI
The Control for HDMI function enables the
TV to communicate with the connected
equipment that is compatible with the
function, using HDMI CEC (Consumer
Electronics Control).
For example, by connecting Sony equipment
that is compatible with Control for HDMI (with
HDMI cables), you can control them together.
Be sure to connect the equipment correctly,
and make the necessary settings.
Control for HDMI
Automatically turns the connected equipment
off when you switch the TV to standby mode
using the remote.
Automatically turns the TV on and switches
the input to the connected equipment when the
equipment starts to play.
If you turn on a connected audio system while
the TV is on, the sound output switches from
the TV speaker to the audio system.
Adjusts the volume (2 +/–) and mutes the
sound (%) of a connected audio system.
You can operate the connected Sony
equipment that has the BRAVIA Sync logo by
the TV remote by pressing:
m/N/X/M/./x/> to operate the
connected equipment directly.
SYNC MENU to display the menu of the connected
HDMI equipment on the screen.
After displaying the menu, you can operate the
menu screen by using F/f/G/g, , colour buttons,
and
RETURN.
Select “Device Control”, then select the desired
option to operate the equipment.
Refer to the instruction manual of the equipment
for available control.
Select “TV Control” to open the TV Menu or TV
options menu.
If “Control for HDMI” of the TV is set to
“On”, “Control for HDMI” of the connected
equipment is also automatically switched to
“On”.
To connect the equipment that is
compatible with Control for HDMI
Connect the compatible equipment and the TV
with an HDMI cable. When connecting an
audio system, be sure to also connect the
DIGITAL AUDIO OUT (OPTICAL) jack of
the TV and the audio system using an optical
audio cable (page 19).
To make the Control for HDMI settings
The Control for HDMI settings must be set on
both the TV side and connected equipment
side. See “HDMI Set-up” page 34 for the TV
side settings. For settings on the connected
equipment, refer to the operating instructions
for that equipment.