Filter
Top Products
34
GB
Specifications
*
1
AV1 outputs available only for analogue TV.
*
2
AV2 outputs watching screen (except PC, HDMI, Component 1080i).
*
3
Specified standby power is reached after the TV finishes necessary internal processes.
*
4
HDMI3 is available only for KDL-32S55xx, KDL-32P55xx, KDL-32P35xx, KDL-26S55xx and KDL-26P55xx.
Design and specifications are subject to change without notice.
Model name KDL-32S55xx/
KDL-32P55xx/
KDL-32P35xx
KDL-26S55xx/
KDL-26P55xx
KDL-22S55xx/
KDL-22P55xx
System
Panel System
LCD (Liquid Crystal Display) Panel
TV System
Depending on your country/region selection
Analogue: B/G/H, D/K, L, I
Digital: DVB-T
Colour/Video System
Analogue: PAL, SECAM, NTSC 3.58, 4.43 (only Video In)
Digital: MPEG-2 MP@ML
Channel Coverage
Analogue:48.25 - 855.25 MHz
Digital: VHF Band III (177.5 - 226.5 MHz)/UHF E21 - E69 (474 - 858 MHz)
Sound Output
10 W + 10 W (RMS) 8 W + 8 W (RMS) 5 W + 5 W (RMS)
Input/Output jacks
Aerial
75 ohm external terminal for VHF/UHF
/ / AV1*
1
21-pin scart connector including audio/video input, RGB input, S-Video input, and Analogue TV
audio/video output.
/ / AV2*
2
21-pin scart connector including audio/video input, RGB input, S-Video input, and audio/video output.
COMPONENT IN
Supported formats: 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P
B/CB: 0.7 Vp-p, 75 ohms/
P
R/CR: 0.7 Vp-p, 75 ohms
COMPONENT IN
Audio input (phono jacks)
HDMI IN 1, 2, 3*
4
Video: 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
PC (see page 35)
Analogue audio (minijack) (HDMI2 only) (KDL-32S55xx, KDL-32P55xx, KDL-32P35xx, KDL-26S55xx,
KDL-26P55xx)
Analogue audio (minijack) (HDMI1 only) (KDL-22S55xx, KDL-22P55xx)
AV3
Video input (phono jack)
AV3
Audio input (phono jacks)
Audio output (Left/Right) (phono jacks)
PC IN
PC Input (15 Dsub) (see page 35)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms, H/V Sync: TTL level
PC audio input (minijack)
i
Headphones jack
USB port
CAM (Conditional Access Module) slot
Power and others
Power Requirements
220–240 V AC, 50 Hz
Screen Size
32 inches
(Approx. 80.0 cm
measured diagonally)
26 inches
(Approx. 66.1 cm
measured diagonally)
22 inches
(Approx. 54.8 cm
measured diagonally)
Display Resolution
1,366 dots (horizontal) × 768 lines (vertical)
Power Consumption
135 W 110 W 60 W
Standby Power Consumption*
3
0.5 W or less 0.5 W or less 1 W or less
Dimensions
(w × h × d)
(with stand)
Approx. 80.7 × 55.7 × 22.2 cm Approx. 67.9 × 48.5 × 22.2 cm Approx. 55.8 × 41.7 × 21.5 cm
(without stand)
Approx. 80.7 × 50.8 × 9.4 cm Approx. 67.9 × 43.5 × 9.3 cm Approx. 55.8 × 37 × 7.9 cm
Mass (with stand)
Approx. 12.7 kg Approx. 10.0 kg Approx. 6.9 kg
(without stand)
Approx. 11.4 kg Approx. 8.7 kg Approx. 6.1 kg
Supplied Accessories
Refer to “1: Checking the accessories” on page 4.
Optional Accessories
See “Installing the Accessories (Wall-Mount Bracket)” on page 31.