Filter
Top Products
33
Using TV Menus
Using the Channel Menu
Favorites Lets you set up a list of up to 8 of your favorite channels.
Press V/v to select the option Add to Favorites and press to add the current channel to
your Favorites list.
To select a favorite channel from the list, press V/v to go through the list and to select
the channel.
• To exit press .
• To quickly access the
Favorites
channel list, press when there is no menu on the
screen.
Cable On Select if you are receiving cable channels via cable TV provider.
Off Select if you are using an antenna.
Add Digital Channels Select to add digital channels without replacing the original channel list. Be sure to set
Cable setting to On or Off in Channel menu for the correct type of input signal you
choose.
Auto Program Automatically sets up the channel list on the TV for all receivable channels (Digital and
Analog).
• Before starting Auto Program, be sure to turn to On or Off on Cable option in the
Channel menu. When it is On, the TV will search cable channels; when it is Off, the
TV will search over-the-air signals with an antenna connection.
• If you are using an A-B RF switch (not supplied) to switch between cable or antenna
connection, be sure to select the correct
Cable
option to
On
or
Off
in the
Channel
Menu.
1 Select Auto Program.
2 Select OK to start Auto Program. When Auto Program is done, select OK.
~
• IMPORTANT: You must perform Auto Program after cable or antenna is
connected. If you cancel Auto Program some channels may not be available.
Show/Hide Channels Allows you to show or hide channels that appear when you use the CH +/– button.
1 Press V/v to scroll through the channels until you find the channel you want to show or
hide.
2 Press to determine if the channel will be shown or hidden.
To show or hide more channels, repeat steps 1-2.
Label Channels Allows you to assign labels to channel numbers.
1 Press V/v to scroll through the channel numbers. Then press to select the channel
number that you want to assign a label.
2 Press B/b/V/v to move through the label characters (A-Z, 0-9) and press to select
it. To move to the next character press B/b/V/v. Repeat to add up to 7 characters to the
label. Then select on screen to set it. To assign labels to more channels, repeat
steps 1-2.
• To delete a character select on screen.
• To have a space between characters select on screen.
• To exit press .
Diagnostics Allows to confirm the current channel performance indicator.
MENU
FAVO RITES
(Continued)