Sony KDL-40R450A Flat Panel Television User Manual


 
7
Getting Started
Getting Started
Setting Up Your TV
Some TV models are packaged with a detached Table-Top Stand so you can mount
your TV to a wall right away. If you are not mounting the TV to a wall, you will need to
attach the Table-Top Stand. You will need a Phillips screwdriver (not supplied) and the
supplied screws to complete the task. Look for the supplied Table-Top Stand instruction
leaflet.
Be sure to consider the following while setting up your TV:
Disconnect all cables when carrying the TV.
Carry the TV with the adequate number of people; larger size TVs require two or more people.
Correct hand placement while carrying the TV is very important for safety and to avoid damage.
Do not put stress on the LCD panel or the frame around the screen.
Ensure your TV has adequate ventilation, see page 16.
For best picture quality, do not expose the screen to direct illumination or sunlight.
Avoid installing the TV in a room with reflective wall and floor materials.
Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may
cause moisture condensation. This may cause the TV to show poor picture and/or poor color.
Should this occur, allow moisture to evaporate completely before powering the TV on.
KDL-46R453A/46R450A/
40R471A/40R450A
KDL-32R421A/
32R400A