Filter
Top Products
10
GB
Overview of the TV
buttons and indicators
1 MENU (page 14)
2 / – Input select/OK
• In TV mode (page 21): Selects the input source
from equipment connected to the TV sockets.
• In TV menu: Selects the menu or option, and
confirm the setting.
3 2 +/-/G/g
• Increases (+) or decreases (-) the volume.
• In TV menu: Moves through the options left (
G)
or right (
g).
4 PROG +/-/F/f
• In TV mode: Selects the next (+) or previous (-)
channel.
• In TV menu: Moves through the options up (
F) or
down (
f).
5 1 – Power
Switches the TV on or off.
Note
To disconnect the TV completely, pull the plug from
the mains.
6 – Picture Off/Timer indicator
• Lights up in green when the picture is switched off
(page 17).
• Lights up in orange when the timer is set
(page 18).
• Lights up in red when digital REC starts in standby
mode.
7 1 – Standby indicator
Lights up in red when the TV is in standby mode.
8 " – Power indicator
Lights up in green when the TV is switched on.
9 Remote control sensor
Watching TV
1 Press 1 on the TV (top side) to switch on
the TV.
When the TV is in standby mode (the 1 (standby)
indicator on the TV (front) is red), press "/1 on
the remote to switch on the TV.
2 Press DIGITAL to switch to digital mode or
ANALOG to switch to analogue mode.
The channels available vary depending on the
mode.
3 Press the number buttons or PROG +/- to
select a TV channel.
Watching TV
3
1
2
2
3
1
010COV.book Page 10 Tuesday, June 26, 2007 12:18 PM