Filter
Top Products
C:\Documents and Settings\Dolors\Mis documentos\2009\EX2L_CORREC
PARAL\11_UK_EX2L\090MEN.fm
masterpage:Left
38
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Screen (for PC input)
Auto Adjustment Automatically adjusts the display position, phase, and pitch of the picture when the
TV receives an input signal from the connected PC.
z
• “Auto Adjustment” may not work well with certain input signals. In such cases,
manually adjust “Phase”, “Pitch”, “Horizontal Shift”, and “Vertical Shift”.
Reset Resets all PC screen settings to factory settings.
Phase Adjusts the phase when the screen flickers.
Pitch Adjusts the pitch when the picture has unwanted vertical stripes.
Horizontal Shift Adjusts the horizontal position of the picture.
Vertical Shift Adjusts the vertical position of the picture.
Screen Format Sets “Screen Format” for displaying pictures from your PC.
Normal Displays the picture in its original size.
Full 1 Enlarges the picture to fill the vertical display area, while
maintaining its original proportion.
Full 2 Enlarges the picture to fill the display area.
Video Settings
Colour System Sets the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, or
“NTSC4.43”) according to the input signal from the input source.
Audio Settings
Speaker TV Speaker Turns on and outputs the TV’s sound from the TV speakers.
Audio System Turns off the TV speakers and outputs the TV’s sound from
external audio equipment connected to the audio output
sockets/jacks on the TV.
Audio Out Variable When using an external audio system, volume output from
audio out can be controlled using the TV’s remote.
Fixed The audio output of the TV is fixed. Use your audio
receiver’s volume control to adjust the volume (and other
audio settings) through your audio system.
Headphone Settings i Speaker Link Switches the TV’s internal speakers on/off when you connect
headphones to the TV.
i Volume Adjusts the volume of the headphones when “i Speaker
Link” is set to “Off”.
i Dual Sound Sets the sound from the headphones for a bilingual broadcast.
Optical Out Sets the audio signal that is output from the DIGITAL AUDIO OUT (OPTICAL)
jack of the TV. Set to “Auto”, when connecting equipment compatible with Dolby
Digital. Set to “PCM”, when connecting equipment not compatible with Dolby
Digital.
010COV.book Page 38 Tuesday, January 20, 2009 5:15 PM