Filter
Top Products
7
Getting Started
Locating Inputs and Outputs
Item Description
1 AUDIO OUT
L/R
Connects to the left and right audio input jacks of your analog audio equipment.
You can use these outputs to listen to your TV’s audio through your stereo system.
2 DIGITAL AUDIO
OUT (OPTICAL)
Connects to the optical audio input of digital audio equipment that is PCM/Dolby*
1
Digital compatible.
3 CABLE/
ANTENNA
RF input that connects to your Cable or VHF/UHF antenna.
4 HDMI IN 1/2/3*
2
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
digital audio/video interface between this TV and any HDMI-equipped audio/video
equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports
enhanced, or high-definition video, plus digital audio. Be sure to use only an HDMI
cable that bears the HDMI logo.
Use the HDMI IN 1 port when connecting DVI equipment. Use a DVI-to-HDMI
cable or adapter (not supplied). Equipment using a DVI connection also requires an
additional audio connection using an audio cable connected to PC/HDMI 1 AUDIO
IN of PC IN.
5 PC IN (RGB) Connects to a personal computer’s video and audio output connector. Can also be
connected to other analog RGB equipment. See “PC Input Signal Reference Chart”
on page 44 for the signals that can be displayed.
For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If an adapter is used, connect the adapter to the computer before
connecting the HD15-HD15 cable.
You may need to adjust the TV settings or your PC’s resolution and timing. See
page 12 for information on how to setup your PC to this TV.
*
1
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
*
2
HDMI IN 3 is available for KDL-46/40/32BX421, and other models (depending on your region/country).
VIDEO IN
VIDEO
AUDIO
L
R
(MONO)
2
Side PanelRear Panel
(Continued)